Seramik Merkezleme Pimi (TC)
TC Tipi Kaynak Somunu Merkezleme Pimleri Topteknik’in kendi üretimidir.
Malzeme: Seramik (ZrO2 ρ =6,1 g/cm3)
M5
M6
M8
M10
M12
Porozite ve Kırılma/Aşınma Dayanımı
M5
Sipariş Örneği: TC M5-5.8S | TC M5-6.2R | TC M5-6.8K
| Tip No Type No (TC…) | Sac Delik Ø Base Hole Ø | Merkezleme pimi uç formları | |||||
|---|---|---|---|---|---|---|---|
| S | R | K | |||||
| L | Ø D | L | Ø D | L | Ø D | ||
| M5-5.2 | 5.4 | 29.8 | 10.0 | 27.3 | 10.0 | 29.8 | 10.0 |
| M5-5.4 | 5.6 | 29.7 | 10.0 | 27.2 | 10.0 | 29.7 | 10.0 |
| M5-5.6 | 5.8 | 29.6 | 10.0 | 27.1 | 10.0 | 29.6 | 10.0 |
| M5-5.8 | 6.0 | 29.5 | 10.0 | 27.0 | 10.0 | 29.5 | 10.0 |
| M5-6.0 | 6.2 | 29.5 | 10.0 | 26.9 | 10.0 | 29.5 | 10.0 |
| M5-6.2 | 6.4 | 29.3 | 10.0 | 26.8 | 10.0 | 29.3 | 10.0 |
| M5-6.4 | 6.6 | 29.4 | 10.0 | 26.7 | 10.0 | 29.4 | 10.0 |
| M5-6.6 | 6.8 | 29.2 | 10.0 | 26.7 | 10.0 | 29.2 | 10.0 |
| M5-6.8 | 7.0 | 29.1 | 10.0 | 26.6 | 10.0 | 29.1 | 10.0 |
| M5-7.0 | 7.2 | 29.0 | 10.0 | 26.5 | 10.0 | 29.0 | 10.0 |
| M5-7.2 | 7.4 | 32.0 | 12.0 | 26.4 | 12.0 | 32.0 | 12.0 |
| M5-7.4 | 7.6 | 31.9 | 12.0 | 26.2 | 12.0 | 31.9 | 12.0 |
| M5-7.6 | 7.8 | 31.8 | 12.0 | 26.1 | 12.0 | 31.8 | 12.0 |
| M5-7.8 | 8.0 | 31.7 | 12.0 | 26.0 | 12.0 | 31.7 | 12.0 |
| M5-8.0 | 8.2 | 31.6 | 12.0 | 26.0 | 12.0 | 31.6 | 12.0 |
M6
Sipariş Örneği: TCM6-6.8R, TCM6-7.4S, TCM6-7.8K
| Tip No Type No (TC…) | Sac Delik Ø Base Hole Ø | Merkezleme pimi uç formları | |||||
|---|---|---|---|---|---|---|---|
| S | R | K | |||||
| L | Ø D | L | Ø D | L | Ø D | ||
| M6-6.0 | 6.2 | 30.7 | 10.0 | 27.2 | 10.0 | 30.7 | 10.0 |
| M6-6.2 | 6.4 | 30.6 | 10.0 | 27.1 | 10.0 | 30.6 | 10.0 |
| M6-6.4 | 6.6 | 30.5 | 10.0 | 27.0 | 10.0 | 30.5 | 10.0 |
| M6-6.6 | 6.8 | 30.4 | 10.0 | 26.9 | 10.0 | 30.4 | 10.0 |
| M6-6.8 | 7.0 | 30.3 | 10.0 | 26.8 | 10.0 | 30.3 | 10.0 |
| M6-7.0 | 7.2 | 30.2 | 10.0 | 26.8 | 10.0 | 30.2 | 10.0 |
| M6-7.2 | 7.4 | 32.4 | 12.0 | 28.5 | 12.0 | 32.4 | 12.0 |
| M6-7.4 | 7.6 | 32.3 | 12.0 | 28.4 | 12.0 | 32.3 | 12.0 |
| M6-7.6 | 7.8 | 32.2 | 12.0 | 28.3 | 12.0 | 32.2 | 12.0 |
| M6-7.8 | 8.0 | 32.1 | 12.0 | 28.2 | 12.0 | 32.1 | 12.0 |
| M6-8.0 | 8.2 | 32.0 | 12.0 | 28.1 | 12.0 | 32.0 | 12.0 |
| M6-8.2 | 8.4 | 31.9 | 12.0 | 28.0 | 12.0 | 31.9 | 12.0 |
| M6-8.4 | 8.6 | 31.8 | 12.0 | 27.9 | 12.0 | 31.8 | 12.0 |
| M6-8.6 | 8.8 | 31.7 | 12.0 | 27.8 | 12.0 | 31.7 | 12.0 |
| M6-8.8 | 9.0 | 31.6 | 12.0 | 27.7 | 12.0 | 31.6 | 12.0 |
| M6-9.0 | 9.2 | 31.5 | 12.0 | 24.7 | 12.0 | 31.5 | 12.0 |
M8
Sipariş Örneği: TCM8-9.4S, TCM8-9.8R, TCM8-10.4K
| Tip No Type No (TC…) | Sac Delik Ø Base Hole Ø | Merkezleme pimi uç formları | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| S | R | K | ||||||||
| L | Ø D | Ø D1 | L | Ø D | Ø D1 | L | Ø D | Ø D1 | ||
| M8-8.4 | 8.6 | 34.0 | 12.0 | 5.5 | 28.4 | 12.0 | 5.5 | 34.0 | 12.0 | 5.5 |
| M8-8.6 | 8.8 | 33.9 | 12.0 | 5.5 | 28.2 | 12.0 | 5.5 | 33.9 | 12.0 | 5.5 |
| M8-8.8 | 9.0 | 33.8 | 12.0 | 5.5 | 28.0 | 12.0 | 5.5 | 33.8 | 12.0 | 5.5 |
| M8-9.0 | 9.2 | 33.7 | 12.0 | 5.5 | 27.8 | 12.0 | 5.5 | 33.7 | 12.0 | 5.5 |
| M8-9.2 | 9.4 | 33.6 | 12.0 | 5.5 | 27.6 | 12.0 | 5.5 | 33.6 | 12.0 | 5.5 |
| M8-9.4 | 9.6 | 33.5 | 12.0 | 5.5 | 27.5 | 12.0 | 5.5 | 33.5 | 12.0 | 5.5 |
| M8-9.6 | 9.8 | 34.2 | 13.0 | 5.5 | 29.2 | 13.0 | 5.5 | 34.2 | 13.0 | 5.5 |
| M8-9.8 | 10.0 | 34.1 | 13.0 | 5.5 | 29.1 | 13.0 | 5.5 | 34.0 | 13.0 | 5.5 |
| M8-10.0 | 10.2 | 34.0 | 13.0 | 5.5 | 28.9 | 13.0 | 5.5 | 33.9 | 13.0 | 5.5 |
| M8-10.2 | 10.4 | 33.9 | 13.0 | 5.5 | 28.7 | 13.0 | 5.5 | 33.7 | 13.0 | 5.5 |
| M8-10.4 | 10.6 | 33.9 | 13.0 | 5.5 | 28.6 | 13.0 | 5.5 | 33.5 | 13.0 | 5.5 |
| M8-10.4 | 10.8 | 34.0 | 16.0 | 8.5 | 29.9 | 16.0 | 8.5 | 34.0 | 16.0 | 8.5 |
| M8-10.8 | 11.0 | 33.8 | 16.0 | 8.5 | 30.1 | 16.0 | 8.5 | 33.8 | 16.0 | 8.5 |
| M8-11.0 | 11.2 | 33.7 | 16.0 | 8.5 | 30.3 | 16.0 | 8.5 | 33.7 | 16.0 | 8.5 |
| M8-11.2 | 11.4 | 33.6 | 16.0 | 8.5 | 30.5 | 16.0 | 8.5 | 33.6 | 16.0 | 8.5 |
| M8-11.4 | 11.6 | 33.5 | 16.0 | 8.5 | 30.3 | 16.0 | 8.5 | 33.5 | 16.0 | 8.5 |
M10
Sipariş Örneği: TCM10-10.8S, TCM10-11.4R, TCM10-11.8K
| Tip No Type No (TC…) | Sac Delik Ø Base Hole Ø | Merkezleme pimi uç formları | |||||
|---|---|---|---|---|---|---|---|
| S | R | K | |||||
| L | Ø D | L | Ø D | L | Ø D | ||
| M10-10.8 | 11.0 | 36.4 | 16.0 | 31.8 | 16.0 | 36.4 | 16.0 |
| M10-11.0 | 11.2 | 36.3 | 16.0 | 31.7 | 16.0 | 36.3 | 16.0 |
| M10-11.2 | 11.4 | 36.2 | 16.0 | 31.6 | 16.0 | 36.2 | 16.0 |
| M10-11.4 | 11.6 | 36.0 | 16.0 | 31.5 | 16.0 | 36.0 | 16.0 |
| M10-11.6 | 11.8 | 35.9 | 16.0 | 31.4 | 16.0 | 35.9 | 16.0 |
| M10-11.8 | 12.0 | 35.8 | 16.0 | 31.4 | 16.0 | 35.8 | 16.0 |
| M10-12.0 | 12.2 | 35.7 | 16.0 | 31.3 | 16.0 | 35.7 | 16.0 |
| M10-12.2 | 12.4 | 35.6 | 16.0 | 31.2 | 16.0 | 35.6 | 16.0 |
| M10-12.4 | 12.6 | 35.5 | 16.0 | 31.1 | 16.0 | 35.5 | 16.0 |
| M10-12.6 | 12.8 | 35.4 | 16.0 | 31.1 | 16.0 | 35.4 | 16.0 |
| M10-12.8 | 13.0 | 35.3 | 16.0 | 31.0 | 16.0 | 35.3 | 16.0 |
| M10-13.0 | 13.2 | 35.2 | 16.0 | 30.9 | 16.0 | 35.2 | 16.0 |
| M10-13.2 | 13.4 | 35.2 | 16.0 | 30.8 | 16.0 | 35.2 | 16.0 |
| M10-13.4 | 13.6 | 35.0 | 16.0 | 30.7 | 16.0 | 35.0 | 16.0 |
| M10-13.6 | 13.8 | 34.9 | 16.0 | 30.6 | 16.0 | 34.9 | 16.0 |
M12
Sipariş Örneği: TCM12-12.6S, TCM12-12.8R, TCM12-13.6K
| Tip No Type No (TC…) | Sac Delik Ø Base Hole Ø | Merkezleme pimi uç formları | |||||
|---|---|---|---|---|---|---|---|
| S | R | K | |||||
| L | Ø D | L | Ø D | L | Ø D | ||
| M12-12.4 | 12.6 | 38.2 | 16.0 | 32.0 | 16.0 | 38.2 | 16.0 |
| M12-12.6 | 12.8 | 38.1 | 16.0 | 31.9 | 16.0 | 38.1 | 16.0 |
| M12-12.8 | 13.0 | 38.0 | 16.0 | 31.8 | 16.0 | 38.0 | 16.0 |
| M12-13.0 | 13.2 | 38.9 | 16.0 | 31.7 | 16.0 | 38.9 | 16.0 |
| M12-13.2 | 13.4 | 38.9 | 16.0 | 31.6 | 16.0 | 38.9 | 16.0 |
| M12-13.4 | 13.6 | 38.8 | 16.0 | 31.5 | 16.0 | 38.8 | 16.0 |
| M12-13.6 | 13.8 | 38.7 | 16.0 | 31.4 | 16.0 | 38.7 | 16.0 |
| M12-13.8 | 14.0 | 35.4 | 16.0 | 29.3 | 16.0 | 35.4 | 16.0 |
| M12-13.8 | 14.2 | 38.8 | 18.0 | 33.0 | 18.0 | 38.8 | 18.0 |
| M12-14.2 | 14.4 | 38.7 | 18.0 | 32.9 | 18.0 | 38.7 | 18.0 |
| M12-14.4 | 14.6 | 38.6 | 18.0 | 32.8 | 18.0 | 38.6 | 18.0 |
| M12-14.6 | 14.8 | 38.5 | 18.0 | 32.7 | 18.0 | 38.5 | 18.0 |
| M12-14.8 | 15.0 | 38.4 | 18.0 | 32.6 | 18.0 | 38.4 | 18.0 |
| M12-15.0 | 15.2 | 38.3 | 18.0 | 32.5 | 18.0 | 38.3 | 18.0 |
| M12-15.2 | 15.4 | 38.2 | 18.0 | 32.4 | 18.0 | 38.2 | 18.0 |
| M12-15.4 | 15.6 | 38.1 | 18.0 | 32.3 | 18.0 | 38.1 | 18.0 |
| M12-15.6 | 15.8 | 34.9 | 18.0 | 30.4 | 18.0 | 34.9 | 18.0 |
| M12-15.8 | 16.0 | 34.7 | 18.0 | 30.3 | 18.0 | 34.7 | 18.0 |
| M12-16.0 | 16.2 | 34.6 | 18.0 | 30.2 | 18.0 | 34.6 | 18.0 |
Porozite ve Kırılma/Aşınma Dayanımı
Zirkonyum oksit (Zirconia) malzemeden imal edilen makine parçalarında porozite, özgül ağırlık ve kırılma/aşınma dayanımı ilişkisi
Porozite ↑
Özgül ağırlık ↓
Kırılma/Aşınma dayanımı ↓
Porozite ↓
Özgül ağırlık ↑
Kırılma/Aşınma dayanımı ↑
Toptechnics (TC..) seramik pimlerinde Yoğunluk ρ ≥ 6,03 g/cm3
